Home / 3D Printing Tips / Top 20 best cheap 3d printer 2021 (Starting at $99!)

Top 20 best cheap 3d printer 2021 (Starting at $99!)


Are you searching for a budget and cheap 3D printer?

We have organized and list 20 best affordable 3d printers priced from $99 to $1,000.

Most people think that the low prices often used to be synonym with poor quality, but that’s no longer the case: the budget 3D printers in our list all provide a great value for the money.

The printers are divided into three parts: best cheap 3D printers under $100, under $300, under $500 and under $1,000.  Top 20 best cheap 3d printer 2021 (Starting at $99!)

Part 1 Cheap 3D printer Under $100

1. iMakr Startt

  • Type: ABS, PLA, Nylon and more
  • Price: $99
  • Print volume: 150 x 150 x 100-mm
iMakr Startt - Cheap 3D Printer Under $100
iMakr Startt – Cheap 3D Printer Under $100

The DIY kit is packaged completely unassembled.

Once you receive the package you may not feel daunted while trying to get the parts of the 3D printer together.

Hence, it is for those looking to convert their spending into a deep learning experience.

Knowing how to assemble a 3D printer makes it easy for users to have an elaborate overview of the operation of these devices.

This means, one can create a 3D printer on their own, if too enthusiastic. However, learning can never be worthless. Hence, choosing a DIY kit that requires a few hours of hard work won’t be a bad option overall.

The retail price for this printer is $99, even one dollar less than $100. There are many great reasons why iMakr Startt is popular for. And, price is one of them.

If you are misjudging the build quality of this 3D printer with its price tag, you are making a huge mistake.

Unlike the cheap 3D printer under $100 that exhibits unstable build quality, this printer is pretty different in those aspects.

You can expect this 3D printer to showcase comparatively amazing build quality which is a result of the smart and decent electronics involved in its making.

However, the printer does have a few limitations. It does lack a reliable frame rigidity. Moreover, the build volume isn’t very impressive.

The company, however, has tried its best to figure out ways to compensate for the challenges. You get the entire tool inside the box that you would need for assembling the printer together.

The setup instructions are also worth mentioning. Easy flow and understandable guide make the challenging setup process smooth and easy.



  • Price is cheap
  • Build quality is stable
  • Printer comes with a fairly good set of assembly instructions, include videos, 3D printable models, Easy flow and understandable guide make the challenging setup process smooth and easy
  • Lack a reliable frame rigidity and the build volume isn’t very impressive.
  • Take time to assemble device

2. 101 Hero

  • Type: ABS, PLA, Nylon and more
  • Price: $104
  • Print volume: 150 x 150 x 100-mm
101 Hero - Cheap 3D Printer Under $100
101 Hero – Cheap 3D Printer Under $100

In 2007, the price is $100 when it was released, now the price has been increased to $104, but the price still is around $100.

The printer is available fully assembled.

To start printing with this device, you just have to turn on the printer and insert the memory card.

The printer will take it from there, without giving you much of a trouble.

To set up the printer, you just need to tighten a few screws which are easy to install, and you can start printing with this device.


  • price is cheap
  • build quality is stable
  • Printer comes with a fairly good set of assembly instructions, include videos, 3D printable models, Easy flow and understandable guide make the challenging setup process smooth and easy


  • Lack a reliable frame rigidity and the build volume isn’t very impressive.
  • Take time to assemble device

3. Kodama Obsidian

  • Type: PLA
  • Price: $99
  • Print volume: 120 x 120 x 120 mm

Kodama Obsidian - Cheap 3D printer Under $100
Kodama Obsidian – Cheap 3D printer Under $100

There are many cheap 3d printer in Kickstarter and the one we’ll describe is called the Kodama Obsidian.

The device is a sleek and minimalistic design.

The basic Kodama Obsidian costs just $99 and it is a great choice for newbies in 3D printing.

You can print with a 50-micron resolution that allows a maximum extruder temperature of 250°C.

The company has also offered color option for its users.

You can choose between white and black color.

What sets this 3D printer apart from its counterparts is the amazing print quality that is difficult to achieve with the cheapest options.

Not just this 3D printer has raised the bar for many others to come, it has given a new definition for cheapest printers under $100.


  • 3D printer features comparatively large build volume when compared to the cheap 3D printers under $100.
  • The 3D printer includes a quick release nozzle, a built-in spool holder, as well as a magnetic detachable print bed


  • Print volume is small

Part 2 Cheap 3D printer Under $300

4. Anet A8 Desktop FDM 3D Printer

  • Type: ABS , PETG , Nylon PVA and more
  • Price: $179.99
  • Print volume: 220 x 220 x 240 mm
Anet A8 - Cheap 3D Printer Under $300
Anet A8 – Cheap 3D Printer Under $300

Anet are a Chinese 3D printer manufacturer who took the Prusa kit model and created their own low cost FDM 3D printer.

Its LCD screen and five buttons make it easy to adjust.

The FDM 3D printer is compatible with materials such as PLA and ABS thanks to a heating plate that can go up to 100 ° C.

With a minimum layer size of 100 microns, the Anet A8 offers decent quality for the low price, too.

Overall, it’s another fantastic yet cheap 3D printing option.


  • Affordable 3D printer kit
  • Capable 3D printer for the price
  • Modifiable
  • Tons of 3D printable enhancements available
  • Great way to learn about FDM 3D printing
  • Functionality improves with each print/tweak
  • Fun project to put together


  • Lackluster assembly instructions
  • Could be difficult to build/use without basic knowledge of 3D printing
  • Relatively steep learning curve
  • UI lacks practicality
  • Getting the perfect print takes time and patience
  • Manual calibration can be a pain (auto-bed leveling available, but sold separately)
  • Not the most aesthetically pleasing design

5. Anycubic Photon Zero

  • Type: ABS , PETG , Nylon PVA and more
  • Price: $199
  • Print volume: 97 x 54 x 150 mm
Anet A8 - Cheap 3D Printer Under $300
Anycubic Photon Zero – Cheap 3D printer Under $300

One of the cheapest resin 3D printers in the world.

The Photon Zero is simple to get started, coming fully assembled and without too much to do to get it working and ready to print.

Despite the low price, Anycubic have ensured adequate printing quality with a new and more stable Z axis with new screw motor and linear guide that will print crisper parts.

It prints at 30 mm/hour, and connects via USB for printing.

If you’re looking for a very low-cost resin printer, the Anycubic Photon Zero could be the cheap 3D printer for you.


  • Easy to assemble
  • Compatible with many types of filaments
  • Comes with a safe power supply
  • Decent print quality


  • Print volume is small

6. Creality Ender 3 Pro

  • Type: PLA, ABS, WOOD,TPU
  • Price: $249
  • Print volume: 220 x 220 x 250 mm
Anet A8 - Cheap 3D Printer Under $300
Creality Ender 3 Pro – Cheap 3D Printer Under $300

The Creality Ender 3 Pro is an upgrade of the popular Ender line of budget printers

It is super simple to connect to your PC to print — simply transfer your 3D printer models over by USB or SD card and you’re ready to go.

The Ender 3 does not come in a fully assembled state, and does need to be built by the user before use is possible.

If you want a beginner 3D printer or just want to get in on the DIY 3D printer action for cheap, the Ender 3 is a fantastic choice.


  • Relatively large build volume for its size
  • Quick and easy print removal
  • Large community
  • Wide variety of aftermarket upgrades
  • Fairly rigid construction


  • Must be assembled
  • Bad customer support
  • Quality Control not great
  • Hit and miss out of the box performance

7. Tronxy XY-2 PRO

  • Type: PLA, ABS, PETG, PC, TPU, PVC, Exotics
  • Price: $255.99
  • Build volume: 255 x 255 x 260 mm
Anet A8 - Cheap 3D Printer Under $300
Tronxy XY-2 PRO – Cheap 3D Printer Under $300

XY-2 Pro kit is far cheaper, at just over $200.

Despite being a DIY 3D printer, the XY-2 Pro still tries to be simple to use for beginners: it’s quick to set up and has a touchscreen to navigate printing options.

Moreover, the Tronxy XY-2 Pro comes with a host of features that you may not expect on such a cheap 3D printer.

Firstly, it has auto leveling, as well as filament detection for when filament has run out.

Secondly, it has the ability to resume a print from when the print failed.

All these features make the XY-2 more beginner-friendly, and more similar to a plug and play FDM 3D printer.


  • User-friendly
  • Auto-leveling calibration
  • Filaments derived from natural substances and safe
  • Good build volume


  • The instruction manual is way too complicated
  • No heating bed

8. Monoprice MP Mini v2

  • Type: PLA
  • Price: $220
  • Print volume:120 x 120 x 120mm
Monoprice MP Mini v2 - Cheap 3D Printer Under $300
Monoprice MP Mini v2 – Cheap 3D Printer Under $300

Equipped with a fully metal frame and a stout base, the MP Mini is rock-solid when compared to most of the cheaper machines in its price range.

In addition, being from Monoprice gives the owner access to their excellent customer service and warranty.

Its low-powered heat bed means it’s restricted to low-warp materials, and its remote extruder means flexible materials would be quite a challenge as well.

However, its primary goal is to print with PLA (or PolyLactic Acid), a safe, environmentally friendly material, and in that regard it absolutely shines.


  • Reliable
  • Sturdy construction
  • Relatively easy to use for its price
  • Good customer support
  • Huge community


  • Small build volume
  • Limited materials selection
  • Flexible materials infeasible
  • Fully manual calibration

9. Comgrow Creality Ender 3

  • Type: PLA, and ABS
  • Price: $249.99
  • Print volume: 220 x 220 x 250 mm
Comgrow Creality Ender 3 - Cheap 3D Printer Under $300
Comgrow Creality Ender 3 – Cheap 3D Printer Under $300

The model is great not only for hobbyists but also for intermediate and advanced creators who are on a budget.

It can produce a volume of 220 x 200 x 250-mm with a resolution between 100 and 400 microns.

The printer can heat up to 110 degrees Celsius in 5 minutes, which makes it compatible with many types of filaments.

The trickiest part is the manual bed leveling. However, it is a minor compromise if you consider all the other advantages starting at a great price.


  • Easy to assemble
  • Can be used for printing large volumes
  • Has a high and fast heat
  • Compatible with many types of filaments
  • Comes with a safe power supply
  • Decent print quality


  • Manual bed leveling
  • Inconsistency with brittle filaments

10. ELEGOO Mars UV Photocuring LCD

  • Price:$239.99
  • Print volume: 120 x 68 x 155 mm
ELEGOO Mars UV Photocuring LCD - Cheap 3D Printer Under $300
ELEGOO Mars UV Photocuring LCD – Cheap 3D Printer Under $300

ELEGOO Mars UV is famous for its user-friendliness and budget-friendly features.

The ELEGOO Mars introducing photo curing technology in this model and claims the best printer for beginners and for experts as well.

This is perfect for people who want user-friendly experience with premium quality printing. It is one of the best cheap 3D printers.

It is easy to assemble, and you can start printing is a few minutes.

This printer operates with UV LCDs as its light source.

It has the durable industrial level design that provides a solid frame and a built-in 3.5” LCD with touchscreen feature.

This allows you to adjust the printing options even offline easily. It comes with user-friendly software, i.e., Chitu box slicing takes less than a minute to set up.

It is compatible with 405NM UV resins and allows using the resins of other brands.

The Printer provides a build volume of 4.7 x 2.6 x 6.1 inches with a layer thickness in the range of 30 to 60 microns.

This product provides an amazing resolution quality of 2,560 x 1,440 pixels.


  • Low price
  • Easy to set up
  • UV LCD light source
  • Slicing software is included
  • Compatible with other brands resin
  • Easy to clean resin


  • Producing smell
  • Low printing speed

11. FlashForge 3D printer

  • Type: PLA
  • Price: $299
  • Print volume: 140 x 140 x 140 mm
FlashForge - Cheap 3D Printer Under $300
FlashForge – Cheap 3D Printer Under $300

The printer has an easy calibration with an intuitive calibration detection system to assist you with the leveling.

Another thing that makes this printer stand out is the quiet operation that makes it suitable to use the printer at home any time of the day without any issue.

When it comes to the build volume, the Flash Forge 3D printer does such a decent job with offering 140 x 140 x 140-mm, not at all bad, especially at this price.

The resolution of the prints ranges from 100 to 500 microns, which makes it one of the highest on our list.


  • Clean design
  • Easy to use
  • Clear touchscreen
  • Removable build plate makes it easier to take out prints
  • Quiet
  • Reliable
  • Handy overhead light and good visibility of prints


  • Very small build volume
  • Bed not heated (sometimes causes warping)
  • No automatic bed leveling
  • Filament cartridge is too small for most non-Flashforge spools
  • Only prints PLA (can also handle PETG to some extent, but only for small parts)
  • Support structures are impossible to fully remove

12. Da Vinci Mini Wireless 3D Printer

  • Type: PLA and PETG
  • Price: $219.95
  • Print volume: 150 x 150 x 150-mm
FlashForge - Cheap 3D Printer Under $300
Da Vinci Mini – Cheap 3D Printer Under $300

Da Vinci Mini is one of the best budgets 3d printers under $200 for any beginner who needs an auto-leveling calibration.

It is easy to use with user-friendly software.

The build volume is 150 x 150 x 150-mm, coming out with a layer resolution between 100 and 400 microns.

It doesn’t just stop there.

Another thing that makes this printer exceptional is that the XYZ printing filaments are made of natural substances, which makes it okay to leave the printer unwatched while printing, not to mention, it is much safer.

The only thing that users might struggle with is the assembly and the setting up of the printer.


  • High-quality prints
  • Largest build volume for this price range
  • Auto-leveling calibration


  • Assembly instruction is a bit complicated
  • Print volume is not larger

Part 3 Cheap 3D printer Under $500

13. QIDI Technology X-one2 Single Extruder

  • Type: PLA, and ABS
  • Price: $309
  • Print volume: 150 x 150 x 150mm
QIDI Technology X-one2 Single Extruder - Cheap 3D Printer Under $500
QIDI Technology X-one2 Single Extruder – Cheap 3D Printer Under $500

QIDI launches the upgraded version of X-one with the name of Xon2. It is the brand of famous Chinese company QIDI, famous for making the best low-cost 3d printer.

This X-one 2 model comes with a 3.5 inch touchscreen with easily recognizable icons that are very responsive and easy to use.

The micro SD card and USB port are provided on the side while the power button is located at the backside.

It is difficult to reach the power button when the printer is placed in the corner of the room.

This product comes with single extruder made up of high-quality parts with proper ventilation to avoid overheating.

Aluminum alloy is used in the manufacturing of a heated print bed with a sticker on the surface.

Its build plate is not removable so you may face difficulty while removing the completed prints.

It provides with inside LED lights that allow you to monitor the printing process.

Otherwise, you have to start the whole process again.

This feature is helpful if you want to change or load the new filament.Built-in 3.5 touch screen provides you with different parameters like print bed temperature and print progress.

It allows you to stop the print anytime and start it at some later time.

You can use the resume option only if you make a save point.

Like other printers of Qidi, it also offers open-source material systems that allow you to use filaments from different brands but with a filament diameter of 1.75mm.

This printer comes with fully assembled packing and allows you just to plug and operate features.

This model allows carrying out printing with PLA and ABS materials and provides you smooth and perfect object printing.

This printer uses FDM technology with a building size of 140 x 140 x 140 mm and layer thickness in the range of 100 to 500 mm.

It gains the maximum temperature of an extruder in the range of 250 C and that of heated bed in the range of 110 C.

The nozzle included in it with a diameter of 0.4mm. It provides the connecting option through Wi-Fi or SD card.


  • Fully assembled
  • Easy to operate
  • Allow filaments of different brands
  • High-quality metal frame
  • Aluminum print bed
  • Touch screen
  • Pause and resume system
  • Provide acrylic covers


  • Difficult to load filament
  • Build size limited

14. Creality CR-10 V2

  • Type: ABS, PETG, PLA, TPU
  • Best price: $419
  • Print volume: 300 x 300 x 400 mm
Creality CR-10 V2 - Cheap 3D Printer Under $500
Creality CR-10 V2 – Cheap 3D Printer Under $500

It is a great DIY 3D printer which I was able to assemble and get working in just 45 minutes.

The Creality CR-10 V2 can compete with 3D printers which cost three times that price.

This bargain 3D printer can print with a layer thickness of 0.05mm, and has a huge build volume for the price, at 300 x 300 x 400 mm.

It’s not the prettiest, but it dominates its competitors in its price range and has a devoted following as a result.


  • Print volume larger
  • Automatic Bed leveling
  • Max hot-end temperature is 260c


  • The USB slot is not provided

15.  Anycubic I3 Mega

  • Type: PLA, ABS, HIPS, Wood
  • Price: $449
  • Print volume: 210 x 210 x 205 mm
Anycubic I3 Mega - Cheap 3D Printer Under $500
Anycubic I3 Mega – Cheap 3D Printer Under $500

Anycubic I3 Mega printer has been launched in 2016, a 3D printer based on FDM technology.

With its 210 x 210 x 205 mm, it offers the user a large manufacturing volume.

Thanks to its filament detector and its heating plate, the use of the machine is simplified.

The 3D printer is compatible with PLA, ABS, HIPS, but also wood and prints with a layer resolution of 0.05 to 0.3 microns.

The FDM machine is delivered almost ready to go, so assembly is done quickly.


  • Delivers astonishing 3D printing quality for a low price
  • Works nicely with most materials
  • Good documentation, spare parts included
  • Resume from the power outage
  • Mechanical filament sensor
  • “Ultrabase” heated bed
  • Fast and versatile printer suited for most materials
  • Quality components, sturdy frame
  • Fast and responsive user interface

16. Artillery Sidewinder X1

  • Type: PLA, ABS, TPU and more
  • Price: $459.99 (Purchase Here)
  • Build Volume: 300 x 300 x 400 mm


  • Loose cables in our review sample
  • Dirt specks under the touchscreen in our review sample
  • Spool of sample filament was extremely bad
  • Somewhat noisy
  • Not very upgrade-friendly
  • Semi-automatic bed calibration advertised as automatic bed calibration
Artillery Sidewinder X1 - Cheap 3D Printer Under $500
Artillery Sidewinder X1 – Cheap 3D Printer Under $500

Artillery Sidewinder X1 3D Printer comes with an advanced heated bed that is capable of being fully heated within two minutes.

It works with a maximum temperature of 80 C and also provided with thermal protection that helps the printer from overheating irrespective of the time of operating simultaneously.

This printer offers print with a dimension of 300 x 300 x 400 mm with quite a big bed.

You can adjust the bed with the help of the built-in touch screen on the printers’ front.

Use of the touch screen is very easy and user-friendly.

You can find a lot of features on this screen like bed leveling and calibration.

The size of the bed is quite large, ensuring you can create a print that’s up to 11.81 x 11.81 x 15.75 inches in size.

The bed can also be easily adjusted and leveled via the touchscreen on the printer’s face.

This printer also offers a power loss detection feature which is amazing.

This will enable you to continue working as the power supply enabled.

This will save your work, and you don’t need to start it from zero.

This product is compatible with different types of filaments and allows you to use the material as per your needs.

It works best with PLA, ABS, TPU, and many flexible material filaments.

This range is offered by only a few printers available in the market in this range.

Use of right and the proper filament is the main factor of your product’s finishing, and this printer will guide you with the help of filament detector.

It will indicate if your printer goes out of filament.

The aluminum frame is used in this printer to make it more durable and avoid any problems that happen with falling off and damaged.


  • 95% preassembled
  • Easy to use
  • Dual Z-axis printing
  • Compatible with different filaments


  • Low-quality glass bed

Part 3 Cheap 3D printer Under $1,000

17. Monoprice Maker Ultimate

  • Type: PLA, ABS, PVA, HIPS,
  • Price: $526.88
  • Print Volume: 200 x 200 x 175 mm
Monoprice Maker Ultimate - Cheap 3D Printer Under $1,000
Monoprice Maker Ultimate – Cheap 3D Printer Under $1,000

The machine is well priced and provides some of outstanding performance in addition to other features.

The Monoprice Maker ultimate 3D printer is relatively heavy one.

Of course, this is a result of the fact that it is designed using heavy, black, anodized metal,

The construction if this machine contains the moving parts as well as enabling you to add covers for the openings if there is need.

Nevertheless, this machine has an adapting and mechanical procedure and software that is highly indicative of top notch 3d printers that cost double or triple as much.

Antoerh great thing about this machine is that you can easily replace its parts such as hot end when there is need given that they are also readily available online.


  • It is a very well built and sturdy 3D printer
  • It has a super precise fill metal direct drive extruder
  • High quality and accurate prints
  • Provides reasonably large print area


  • Manual bed leveling system
  • Fans are not good and quite loud

18. Bibo Dual Extruder

  • Type: ABS, PLA, Dissolvable filament (HIPS), Flexible filament (TPU)
  • Price: $799
  • Print Volume: 214 x 186 x 160 mm
Bibo Dual Extruder - Cheap 3D Printer Under $1,000
Bibo Dual Extruder – Cheap 3D Printer Under $1,000

This dual extruder 3D printer comes with laser engraving features as well.

Yes, you have heard it right.

The 3D printer can print objects and parts and can engrave on light materials such as paper, wood, cardboard, etc.

With a decent laser engraver that may not be the best in the market, the 3D printer does make some difference.

Apart from a dual extruder that lets you print with different colors, the 3D printer also has dual cooling fans.

One of the fans is installed in the front of the nozzle and other at the back of the machine.

The cooling features help in working with material that needs high temperature for melting.

Bibo Dual Extruder 3D Printer also senses when the printer is power off in the middle of printing and when the filament is over.

These two sensors help in restoring the 3D print where it was paused. Hence, less failed printing. You do not have to start printing from scratch.

Once your printer stops because of a power outage, it will regain its operation after the power comes back on its own.

The same goes for the filament too. If your filament is over in the middle of a print, the operation of the 3D printer will be paused until you refill the material.


  • It possesses dual extruder
  • Multi-color printing is possible
  • Metal frame for extra reliability
  • Removable glass bed
  • Support for multiple filaments


  • Build space isn’t very large
  • Unavailability of automatic bed leveling before the print starts

19. Original Prusa i3 MK2S

  • Type: PLA, ABS, PET, HIPS
  • Price: $749
  • Print Volume: 250 x 210 x 210 mm
Original Prusa i3 MK2S - Cheap 3D Printer Under $1,000
Original Prusa i3 MK2S – Cheap 3D Printer Under $1,000

This 3D printer comes stocked with the advanced features, many that aren’t available with most of the expensive 3D printers as well.

The heated bed with cold corner compensation to ensure that the print bed remains at a constant temperature helps throughout the printing process for the best quality prints.

It also has enough tools to help calibrate the nozzle. So, you do not have to worry about it at all.

Plus, the 3D printer is from an open-source community which means you can use any hardware and software with this 3D printer.

There is no necessity for using only expensive filaments.

It goes well third party filament very well.

Moreover, the printer self pre-test saves you from your mistakes. It is highly reassuring that you have made the right setup.

If you have assembled the device, you certainly would like to know how far it was successful. And, this machine tells you the same.

It itself checks for everything and verifies if it is completely operational before you start the printing process.

The auto-leveling feature is again a great aid when setting the device for use. There are companies that flaunt about providing an auto leveler, however, not everyone gets it right.


  • The printer is from the open-source
  • Easy to set up and assemble
  • It has a large online community of supporters and users
  • Amazing print quality
  • Automatic bed leveling
  • Heated print bed
  • Compatibility with third-party filament system
  • Multiple material support
  • Affordable


  • Open frame
  • Non-removal print bed

20. Tiertime UP Mini 2 ES

  • Price: $699
  • Print Volume:
Tiertime UP Mini 2 ES - Cheap 3D Printer Under $1,000
Tiertime UP Mini 2 ES – Cheap 3D Printer Under $1,000

Talking about its features, the first thing that comes to mind is the HEPA filter. This is an integral part of the design.

So, what is a HEPA filter? This question may raise some brows. But you would almost be on the same page after learning about the reason for including HEPA filter in the design.

The 3D printers work with ABS material. These materials when melts produce harmful fumes and particles.

With the help of the HEPA filter, the majority of the fumes are filtered.

So, you can work without any worries at your desk.

Also, the printer has a perforated bed and an enclosed chamber.

This is useful in maintaining the print quality at its best.

Moreover, the filament caddy is separated from the 3D printer and kept close to the 3D printer.

This helps in saving the material through unnecessary air exposure and obtaining the ultimate quality of the prints. It saves money too as the material does not expire prematurely.

One thing that might bother some is the tiny build volume.


  • The 3D printer can work with multiple filaments
  • The build volume is more than sufficient for most of the applications
  • It creates precise and accurate 3D models
  • Easy to setup and beginners friendly


  • Poorly Translated Documentation and Customer Service
  • The touch screen may also respond slowly in some cases.

Choose Your Best Cheap 3D Printer

3D printing is trending nowadays, and different brands will provide you the best offers with their models.

So, we have discussed the different brands with different price ranges that will allow you to choose the best printer that suits your needs easily.

We also discussed different features to provide you the best information.

OXO3D designs Anime and Video Game 3D Printable model STL files, you can check our Anime 3D print model work and Follow us on Facebook, you can find your favorite character 3d printable file, also let us know which character you like, we will create one for you!

Leave a Comment

Your email address will not be published.

This div height required for enabling the sticky sidebar